Posted on September 17, 2008 - by Richard

HHO Performance Test Requirement!

The HHO performance test needed during hydrogen generator conversion is to use a scan gauge. If you remember in my earlier blog where I showed you a laptop being used as an engine scanner, here I will show you a cheaper alternative. This is a better procedure in monitoring your engine computer management performance. In simple terms, it gives you the engine fuel mixture status like if it is in open or close loop. This is crucial when feeding the hydrogen gas to your engine intake so that a proper balance is reached between HHO gas production and combustion without getting the fuel too lean. The same can be attained if you install a scan gauge.

This hho performance gadget is actually better because:

1.) It is compact, rough and sturdy construction. Also, it can be installed in your dash with the maximum visibility. This becomes particularly important when monitoring the readings and you want to change the settings quickly with a flick of a switch.

2.) Aside from showing engine hho performance readings, it gives you stats such as vehicle MPG, engine rpm, fuel consumption in GPH (gallons per hour) , HHO production rate, open and close loop status…etc. And all of these can be displayed by switching a user friendly switches for reset and viewing the appropriate readings you need.

3.) To do this hho performance test, ask for SCANGAGE II and you can buy it online by searching it in Google, Ebay, Amazon or even Utube. Make sure to specify all the reading you want but the ones above are the very basic specs since it is always being updated all the time. In case you forget, always include the HHO flow rate, open/close loop, vehicle mpg and especially the vehicle gph (gallons per hour) so you can determine the increase in gas mileage.

Installation is usually straight forward which comes with instructions when you buy the hydrogen gas saver kit. You can also contact or get assistance from a licensed mechanic to show you the proper wiring diagram and connections for your specific engine computer.

Shown on this video is a quick installation guide for this hho performance test SCAN GAGE II. In this demo video, an extension wiring harness connection is shown being assembled for a pick up truck. He also mentioned where you can buy the tools and supplies so you can install this hydrogen gas saver kit yourself. For your safety, always ask a mechanic to help you install this. ATS also provides this assistance so you can protect your vehicle.

Notes:

Instructions given here about hho performance test by ATS are given at your own risk and could be changed anytime. Should you have any additional issues or question, feel free to add it on the comment section below.

Before using HHO performance test tips, please consult your local city bylaws regarding smog test and vehicle engine computer alteration before doing modification to your engine computer connections.